http://viking360.com/downloads/thevikin ... _setup.exe
There is the new software. Analogs fixed, but the firmware is waiting to be written. Ignore some of the new loop settings under the gear + X/Y axis disabling until the new firmware.
I can help out with testing or anything else.
The thing is, for M14 you need a "humanized rapid fire" This basically is a rapid-fire that is broken up into a long macro.
Basically the macro lasts for enough shots for a full clip. It can counteract each shot perfectly with the correct analogs - then you can disable the analogs that aren't needed (such as the x-axis for the M14)
Then, you set the loop settings to stop when you let go of RT. This will allow every shot to be perfect.
You must have the speed slower - maybe .8-.87 ... anything that won't ever skip or lag. A lag or skip will hurt an anti-recoil, but just stop shooting for a half of second to restart the rapid-fire anti-recoil.
My beta-humanized rapid-fire, won't work perfect until the new firmware.
viewtopic.php?f=55&t=2645&p=22144&hilit=test+for+odingalt+only&sid=1a4377c996a2a93217e3a0eb7186e6ff#p22144
It is a beta. I need odingalt to perfect it a little bit. Just the beginning and second are the 2 things that need to be fixed.