help :(

[jay2nice000]

i have searched and came up empty handed so i got my controller today controller looks sweet, but i have a problem or maybe i missing something here but i know you have to press start and then hook the control up to the pc and then download the pre macros from here but when i put it on the controller it looks all good until i unplug the controller from the pc the white lights stay on. so i took off the battery pack and put it back on and everything looks like a go...but its not i tried to use the macro (street fighter) and nothing so when i pluged the controller back on to the pc and my macros arent saved on my controller . so i did it again and the same thing. i saved the macros on my pc but why arent they saving on the controller what am i doing wrong

 

[NYjetsNY1]

New AA fresh batteries. Put into controller.

Press start. Plug controller in. All 4 LED's should be flashing 2/4 1/3 etc...

Then put macros on computer. Press bottom right button on software. It sends the macros to controller.

Then when done, all leds will flash again.

Unplug controller.

Take batteries out put back in.

Was I specific enough?

 

[jay2nice000]

hmm well i changed the batteries even tho they still had about 60 percent power left. but when i did change them i notice something, with my old batteries led color was 1 white 2 pink 3 pink 4 pink and but when i put the new batteries it was led 1 blue 2 white 3 white 4 white. is that normal? but for the info i thought that the macros was automatic loaded on to the macro i didnt know i had to import it to the controller ( im such a nNOOB ) but i dont know if im out of woods yet.... cause im at work so i cant test it out yet but i think i got it. one more question how can i change the color on the leds i dont see a option for it

 

[NYjetsNY1]

top of the software right click the red led that is defaulted for page 1, change led there.

The color is different, as fresh batteries show up blue-white and dying batteries show up pink-red when in programming mode.