Installation instructions for CG boards HELP!!!!!

[gpadin]

I have a CG type of board and I'm trying to build a duo/odens raven with the added buttons.
I downloaded "ALL INSTALLATION LINKS ~ DOWNLOADS - Both Raven & Hammer" instructions from: http://viking360.com/forums/viewtopic.php?f=22&t=1162
The instructions there start saying "This tutorial covers the 'sleeper' installation. The 'duo' installation diagrams are included at the bottom. " There is no diagram at the bottom of the pages.
Is the wiring diagram the same on the controler board? I see diferences in the way it gets solder to the viking board.
Also it doesn't show were the 2 buttons go on the controller.
Any help pointing to the right link or clarifications to my ignorence is greatly apreciated.

Thanks in advance

 

[Ben]

Well if you install all the points the same as the sleeper, except N, F, H.

These diagrams may help;

Wire the tact buttons like this;

Let me know if you need some more help

 

[gpadin]

Thanks Ben!!.

So that I'm clear....the wiring on the controller PCB is the same for both Viking configurations (DUO & Sleeper) right?
What makes the difference is the wiring going to the Viking Board

 

[Ben]

Thanks Ben!!.

So that I'm clear....the wiring on the controller PCB is the same for both Viking configurations (DUO & Sleeper) right?
What makes the difference is the wiring going to the Viking Board

They are the same, except on the duo/raven you don't wire the Sync Button up and instead you wire both tact switches..

 

[gpadin]

Awesome Ben!!!!
Dude with your help I finish the mod!

Thanks a lot for your support!!
I really appreciated.

 

[Ben]

Glad to be of assistance