problem

Discussion in 'XBOX360 Legacy Tech Support' started by A-B, Jul 15, 2009.

  1. A-B

    A-B New Member

    Hello
    I bought 6 of your KIT, I went(took) up a KIT but is recognized not my computer, I am under Windows Vista 64.
    On the lever I have the led 3 and 4 which flashes but one time in game(set,play) nothing of it passes.

    Quite the welds are correctly made, I see not where from comes the problem.
     
  2. odingalt

    odingalt Well-Known Member Staff Member

    The DIY kit comes programmed with 'sleeper button test code'.

    You configure as 'sleeper' or as 'duo'? If you configure as duo, I recommend that you upload the 'duo button test code'.


    Test code:

    Player 4 LED flashes 1x - Left thumbstick
    Player 4 LED flashes 2x - Left bumper
    Player 4 LED flashes 3x - Right bumper
    Player 4 LED flashes 4x - Right Thumbstick

    Player 3 LED flashes 1x - X
    Player 3 LED flashes 2x - Y
    Player 3 LED flashes 3x - B
    Player 3 LED flashes 4x - A

    Player 4 LED flashes 5x - Sync (for sleeper), or right-tac (for duo)
    Player 3 LED flashes 5x - Left-tac (for duo only)

    Player 3 LED flashes 1x then player 4 LED flashes 1x - Left Trigger
    Player 3, Player 4, Player 3, Player 4 - Right trigger
     
  3. A-B

    A-B New Member

    I have download files, but the lever is recognized not my computer Windows vista 64B.
    How is that the lever is recognized by PC?
    Thank you
     
  4. Fredrow

    Fredrow Active Member

    If I'm hearing you right, when your controller is connected to your PC some of the LED's are blinking???

    When you are testing your controller you should not have it connected to your PC, because when it is connected the mod chip is thinking one of the pins is shorted but it is not you just have to disconnect your controller from your PC and turn off controller then turn it back on....

    If this did not answer your question please post again and explain more in detail step by step of where your problem is accruing and then we will be better able to assist you.....

    Thanks.......
     
  5. A-B

    A-B New Member

    I am going to try to explain to you, I have the led number 3 of the lever which makes that to flash.
    My computer of recognize not the lever, it is thus impossible to me to use files.

    I have make this assembly(editing)

    http://www.acidmods.com/forum/index.php?topic=31459.0
     
  6. A-B

    A-B New Member

    Check maintaining the lever is recognized well, but Windows says to me that Windows does not re-know him(it).
    I need help(assistant) I bought all the same 6 KIT which(who) do not work on my computer
     
  7. Fredrow

    Fredrow Active Member


    Hey this might be a stupid question, but do you have the USB key connected the right way to the board, because if it is not connected right the PC wont recognize it......
     
  8. A-B

    A-B New Member

    I link the key as another key USB, I make besides, to nothing it make what then so that it is acknowledged?
     
  9. odingalt

    odingalt Well-Known Member Staff Member

    How many programming/usb pins are on the chip? 3 or 4?

    *The chip must be powered from the controller.
    *Be sure you plug in the USB with the correct polarity.

    Can you provide pictures ?
     
  10. Fredrow

    Fredrow Active Member


    This is how the KEY should be when connecting to your PC..............

    [​IMG]
     
  11. A-B

    A-B New Member

    In this sense(direction) there he(it) is not recognized, in the other sense(direction) he(it) is recognized but bad.
     
  12. A-B

    A-B New Member

    I have directly just bought a quite ready lever, I hope that she(it) will walk(work).
    I modified approximately 400 levers I have never had no concern(marigold).
    The I tried with 3 of your KIT and it does not walk(work)
     
  13. Jbasto

    Jbasto New Member

    I cant understand one word u have written in the 7 post.

    Can u please explain yourself better :shock:
     
  14. A-B

    A-B New Member

    Check I am going to try.
    I went(took) up 3 KIT on 3 levers nobody works, led 3 and 4 flashes, but levers are not recognized by Windows Vista 64bits.

    Why led 3 and 4 flash all the time?
    Why Windows Vista 64 bits do not recognize levers?

    http://www.dailymotion.com/XxPadBoxX/video/16603274
     
  15. GAMEROMS-SCAMMER

    GAMEROMS-SCAMMER New Member

    from watching your video it looks to me like theres issues with atleast 6 of your wires or connections.
     
  16. A-B

    A-B New Member

    I do not have to weld the sons(threads) for A X B Y LB and RB, is it who(which) raises problem?
     
  17. A-B

    A-B New Member

    OK that works the lever is recognized by my PC, I did not press on the button of synch :D
     
  18. odingalt

    odingalt Well-Known Member Staff Member

    Codes:

    LED4 x1 - LEFT THUMBSTICK.
    LED4 x2 - LEFT BUMPER.
    LED4 x3 - RIGHT BUMPER.
    LED4 x4 - RIGHT THUMBSTICK.

    LED3 x1 - BUTTON X (BLUE)
    LED3 x2 - BUTTON Y (YELLOW)
    LED3 x3 - BUTTON B (ORANGE)
    LED3 x4 - BUTTON A (GREEN)

    LED4 X5 - Sync button (for SLEEPERS), OR, Right tactile (for DUOS)

    LED3/LED4 sequence - LEFT TRIGGER
    LED3/LED4/LED3/LED4 sequence - RIGHT TRIGGER

    In your video I see:

    LED4 3x - You have a problem with RIGHT BUMPER.
    LED4 4x - You have a problem with RIGHT THUMSTICK.
    LED3 1x - You have a problem with BUTTON X
    LED3 2x - You have a problem with BUTTON Y
    LED3 3x - You have a problem with BUTTON B
    LED3 4x - You have a problem with BUTTON A
     
  19. odingalt

    odingalt Well-Known Member Staff Member

    Correct.

    If button is not connected, error code will appear.
     
  20. odingalt

    odingalt Well-Known Member Staff Member

    Great news! :) Yes, a reminder, to put chip into programming mode:

    SLEEPER: Remove batteries to power off controller. Hold SYNC button, power up controller. Plug in USB.

    DUO: Remove batteries to power off controller. Hold RIGHT TACTILE button, power up controller. Plug in USB.
     

Share This Page