WunderWaffes
New Member
I have added the new firmware to my controller and tried to add the basic cod rapid fire or w/e its called and it wont let me rapid fire. Yes my batteries charged all night and yes i have the tac. switch to enable it on.
THe basic rapid fire will not work
- Thread starter WunderWaffes
- Start date
CertifiedGoon
New Member
WunderWaffes said:
Samething Happen To Me So I just Down Grade To The Old Firmware...........
WunderWaffes
New Member
where do you get the old firmware?
WunderWaffes
New Member
Okay i think i have found my problem. My right trigger will not let me use a macro on it. Like if i set rapid fire to right trigger it will only shoot once. And it just seems to be right trigger because i assigned it to right bumber and it worked as well as the tact. switches.
Hit up the http://www.viking360.com site
click on downloads
click on macro library
There are some examples. Depending on if you want rapidfire from your trigger, or from the tac switch, you'll want to use a different .VKM file
Also be sure to upgrade to the latest firmware as this will fix a known issue for rapidfire on the left trigger at least http://www.viking360.com/downloads/thev ... .8.2.0.bin
Also be sure not to use any .vks posted by any other users, there seems to be a bug affecting .vks causing them to be corrupt at the moment, so best to always start from scratch or only re-use vkm's from others.
click on downloads
click on macro library
There are some examples. Depending on if you want rapidfire from your trigger, or from the tac switch, you'll want to use a different .VKM file
Also be sure to upgrade to the latest firmware as this will fix a known issue for rapidfire on the left trigger at least http://www.viking360.com/downloads/thev ... .8.2.0.bin
Also be sure not to use any .vks posted by any other users, there seems to be a bug affecting .vks causing them to be corrupt at the moment, so best to always start from scratch or only re-use vkm's from others.