In a reply by Odin, (see above) he said that the custom made hex's are sensitive to button issues. I got from that reply that if there was a button issue, then my custom made hex would probably not work. So what im asking is how could my custom hex and viking's premade hex (i.e. "the works")...
i can open it up and check the connections on the wires. Question for Odin - why is the controller more sensitive to a button problem with my hex vs. your hex? being a hex, are they not both the same, and should theoretically either work together or fail together
ok i ran the button test code again and the #4 LED flashes 3x constantly. All the other buttons can be tested and seem to check out. Does this mean there is a wire out of place or loose which could be causing the issue? I dont recall the LED flashing constantly the last time i ran the test code...
ive ran the button test code and everything seems to be working correctly. Ive also erased the device and reinstalled a program into the controller. The crazy lights, that was a one time deal. The real issue im having is the mod will not turn on if i load a custom made setup from the hex...
hopefully he can give me some insight on this. im pretty electronically inclined so being careful and precise is what i do.... opening it up hasn't had any affect on the situation. everything is still firmly in place.. thanks alot for trying to troubleshoot with me. two heads are better than...
i have deleted all software, all hex edits, and reinstalled software, remade hex setups and still no luck....ive tried to check the "allow configuration" box when trying to load a custom setup but it says load failure once you program a hex into it. when i dont check that box and load a setup...
Yes i did purchase from viking360.com before macro was available.
Brand new batteries, left trigger + sync........check and check. I have been making my own setups for a while now and been doing it the same way every time but never ran into this before. I dont use my mod very often but still...
Hello, I have a Thor's Hammer that i bought from viking a few years back. For some reason when i make a custom setup with the hex editor and load it into the controller through the 3.5mm jack, the software says it is loaded successfully but when i go to turn it on using the left trigger + sync...