DIY mod kit from this site Q???

[sv7007]

ok so i am thinking of buying the mod kit here in a few minutes since it is so cheap. how hard is it to actually install these things because i have never done it. i have a 2 year old evil controllers mod and it has had so i figured i would try this place out. also if you could list what all i would need to help me install the chip i would be really grateful.

thanks,

sv7006

 

[bobdanoob]

If you have never soldered before its going to be tough. I installed my own last week and it took me a while and I have experience soldering. Heres everything I used:

Soldering Iron.
Solder.
Flux.
Double sided foam tape.
Electrical Tape.
Hot Glue Gun.
Hot Glue Sticks.
30AWG Wire.
Drill.
Drill bits for the Tact Switches and 3.5mm port.
T8 screwdriver.
Exacto Knife Set.
Helping Hands.
Patience.

Don't try and do this if you have never soldered. Either pay someone or buy the controller already completed. Odds are your going to screw something up.