ESE has DIY Kits & working on tutorial page too...

[Fredrow]

Just wanted to let people know that East-Seattle-Electronics carers DIY Viking360 kits. You will find them under the Products tab on the website (http://www.east-seattle-electronics.com)

On that same page as the DIY kits I am adding links to tutorials on how I install the Viking360 board. Should have it all done at the end of the weekend. I got a small jump on it tonight and was able to get the tutorial on how I prep the Viking360 board for installing it onto the Xbox360 PCB.....

 

[obo]

nice fredrow, that should boost sales a lot

 

[Ben]

I really need to start carrying some kit's aswell :/

I will soon hopefully!

 

[viking360fan]

congratulations

 

[Paul]

Love you in a straight way Fredrow. You should sticky this thread.

 

[IrishStyle]

That's cool fredrow....now I can get another DIY kit finally....didn't want to order from foundmy.

 

[Xx Binno xX]

I'm not big on the DIY but Fredrow you should put the torx t8 screwdriver for sale aswell for people who buy the DIY they don't have the right tools to open the controller. I would by one but don't have a soldering iron or the torx t8 screwdriver lol.

 

[Fredrow]

You really dont need the T8 driver....

If you get a small flathead screwdriver, one that is small enought to sit in one of the slots of the star ontop of the screw head, you can then un-screw it....

 

[Paul]

You really dont need the T8 driver....

If you get a small flathead screwdriver, one that is small enought to sit in one of the slots of the star ontop of the screw head, you can then un-screw it....

You should probably sell the 30AWG wire on your website that you use.

 

[geestthebeast]

You really dont need the T8 driver....

If you get a small flathead screwdriver, one that is small enought to sit in one of the slots of the star ontop of the screw head, you can then un-screw it....

That is what i do, i have a torx t8, but its not the security driver, so i put a small screwdriver in there to break the little pin, then i use my torx to unscrew all of them. ill do the mod, paint the screws again, or replace them with allen key type screws, then put it all back together and its all perfect.