Have a question about rapid fire.

K

KyleH

Member
Is there a way to edit the shots per second without plugging the ragnarok into the computer? If so, can you explain how, or leave a link.. Thanks.

BTW, I have to give you guys props, because I had a minor issue with my controller a couple months ago, so I sent it in. I got it back that same week, working perfectly. THANKS
 
odingalt

odingalt

Well-Known Member
Staff member
Yes sir there is a way to do it on XBOX360 Ragnarok without plugging into the PC.

Instructions on Adjusting Speeds on the Mod (Without USB programming jack)


Enter programming mode, select which mode needs to be programmed

Hold
the mod switch + tap the sync button to enter programming mode. Player
3 and Player 4 LED's will blink rapidly. The mod is now in programming
mode, and is awaiting user input. The user must now press one of these
buttons to initiate programming of that feature:

Fire Weapon (right trigger in default button layout) - Rapidfire speed
Melee (right thumbstick in default button layout) - Quick scope speed
Reload (button X in default button layout) - Fast Reload delay
Throw lethal (right bumper in default button layout) - Perfact Active Reloads delay

For
example, if the user is in RapidFire Mode #3, and they press the right
trigger, the mod will start programming RapidFire Mode #3. Or for
example, if the user is in Fast Reload mode #8, and they press Button X,
the mod will start programming Fast Reload mode #8. So the user must
first scroll to the mode they want to program, before initiating the
programming sequence.


Rapidfire speed programming

User
can program speeds from 1.0-99.0 shots per second. First "tens" digit
is programmed, then "ones" digit, then "decimal" digit.

Once the
user has entered rapidfire speed programming, the mod will flash the
"tens" digit on Player3 LED. Hold right trigger to increase tens digit,
hold left trigger to decrease tens digit. A quick LED flash means
digit is "0". Press mod switch to move to next digit.

Mod will
flash "ones" digit on Player 4 LED. Hold right trigger to increase ones
digit, hold left trigger to decrease ones digit. A quick LED flash
means digit is "0". Press mod switch to move to next digit.

Mod
will flash "decimal" digit on Player 3/4 LED. Hold right trigger to
increase decimal, hold left trigger to decrease decimal. A quick LED
flash means decimal is set to 0. Press mod switch to save new speed.
Player3/Player4 led flash to confirm saving of new speed.


QuickScope delay programming

User
can program "delay units" from 1-255. First "hundreds" digit is
programmed, then "tens" digit, then "ones" digit. A good delay for
Modern Warfare 3 is somewhere around 140 delay units.

Once the
user has entered quickscope delay programming, the mod will flash the
"hundreds" digit on Player3/4 LED. Hold right trigger to increase
hundreds digit, hold left trigger to decrease hundreds digit. A quick
LED flash means digit is "0". Press mod switch to move to next digit.

Mod
will flash "tens" digit on Player 3 LED. Hold right trigger to
increase tens digit, hold left trigger to decrease tens digit. A quick
LED flash means digit is "0". Press mod switch to move to next digit.

Mod
will flash "ones" digit on Player 4 LED. Hold right trigger to
increase ones digit, hold left trigger to decrease ones digit. A quick
LED flash means decimal is set to 0. Press mod switch to save new
speed. Player3/Player4 led flash to confirm saving of new speed.


Fast Reload delay programming

User
can program "delay units" from 1-255. First "hundreds" digit is
programmed, then "tens" digit, then "ones" digit. Delay unit is
different for each gun, I have attached a spreadsheet that a customer
gave to me. Each COD game and each gun can be different, and it can be
affected by the perks and secondary that the combatant is holding. This
is why customization is so important, because there are hundreds of
different values depending on the customer's soldier configuration.

Once
the user has entered fast reload delay programming, the mod will flash
the "hundreds" digit on Player3/4 LED. Hold right trigger to increase
hundreds digit, hold left trigger to decrease hundreds digit. A quick
LED flash means digit is "0". Press mod switch to move to next digit.

Mod
will flash "tens" digit on Player 3 LED. Hold right trigger to
increase tens digit, hold left trigger to decrease tens digit. A quick
LED flash means digit is "0". Press mod switch to move to next digit.

Mod
will flash "ones" digit on Player 4 LED. Hold right trigger to
increase ones digit, hold left trigger to decrease ones digit. A quick
LED flash means decimal is set to 0. Press mod switch to save new
speed. Player3/Player4 led flash to confirm saving of new speed.z


Perfect Active reloads delay programming

User can program "delay units" from 1-255. First "hundreds" digit is programmed, then "tens" digit, then "ones" digit.

Once
the user has entered perfect active reloads programming, the mod will
flash the "hundreds" digit on Player3/4 LED. Hold right trigger to
increase hundreds digit, hold left trigger to decrease hundreds digit. A
quick LED flash means digit is "0". Press mod switch to move to next
digit.

Mod will flash "tens" digit on Player 3 LED. Hold right
trigger to increase tens digit, hold left trigger to decrease tens
digit. A quick LED flash means digit is "0". Press mod switch to move
to next digit.

Mod will flash "ones" digit on Player 4 LED.
Hold right trigger to increase ones digit, hold left trigger to decrease
ones digit. A quick LED flash means decimal is set to 0. Press mod
switch to save new speed. Player3/Player4 led flash to confirm saving
of new speed.
 
R

Rob0tHD

New Member
I didn't know you could even edit it without the PC, thanks so much! :D Both of you, for the question + answer :)
 
odingalt

odingalt

Well-Known Member
Staff member
Clay

If you have the USB PS3 Ragnarok, you must use the PC to customize the speeds (can't be done through pressing buttons).
 
You must log in or register to reply here.
Top