Untill Odingalt posts a MW2 rapid fire use this

[M1A1xVIKINGxFTW]

its only right trigger but here is the best i could get it....you might be able to tune it some more, if your going to tune it you should use 0.8.2 and dont touch the dots just click the gear on the right and make the multipyer anywhere between 2.80 and 1.00 thats where i got the best results. after you change the multiplier click OK then click the checkmark on the right of the timeline editor and put it back into your right trigger macro slot. enjoy!

 

[M1A1xVIKINGxFTW]

heres another rapid fire.....with SWEET led effects

 

[odingalt]

Ok I finally got some posted temporarily on the macro downloads page, hit up our 360 modded controller site http://www.viking360.com

Click on Downloads

Click on Macro Library

You'll see some .VKM posted by me. We're still struggling with .VKS corruption issues to best to start every macro set out from scratch. VKM's seem to save/load fine to feel free to share away with those.

 

[M1A1xVIKINGxFTW]

Ok I finally got some posted temporarily on the macro downloads page, hit up our 360 modded controller site http://www.viking360.com

Click on Downloads

Click on Macro Library

You'll see some .VKM posted by me. We're still struggling with .VKS corruption issues to best to start every macro set out from scratch. VKM's seem to save/load fine to feel free to share away with those.

cool.....but you gotta admit that the LED effect is SWEET! :mrgreen:

 

[v360Reflex]

guys try this on MW2 took me awhile to find really good speeds and such! i love using this now! ALSO WORKS GREAT WHEN PNC is plugged in.!

 

[v360Reflex]

Version 2 of MY MACRO PRESET (every button lights up the LEDs when clicked.pushed down)