x CHAVES x
New Member
hey whats up i bought a self install chip but there was no wires that came with it so im wondering what guage wire should i use for its optimum performance
x CHAVES x said:ok ive wired everything but its a total disaster. when i power on th econtroller the led light that indicates the chip is on doesnt go on so presumably the chip isnt on. when ever i use it ill press a but it jumps and switche my weapon. is there someone who i can just send my controller in to to fix it??
Acidmods rated it an 8 in difficulty.geestthebeast said:I notice fredrow started to sell these, on a scale of 1-10 for a novice, how difficult would the full mod for a hammer be, 1 being easy, 10 being hardest. ive done some mods with PIC chips from brianspdr.com and rapidfiremods.com, and one from gamermodz.com, but how hard is the viking mod kit installation? And where can i get another torx 8 screwdriver? i seem to have lost mine, do you think home depot, or Lowe's would have a torx 8?
geestthebeast said:I think im gunna go for it, i have a 13 watt soldering iron, so it should be safer and easier to use, that way i don't burn anything out, and i can buy some 30 gauge wire and i allready have rosin core solder. Plus radio shack will sell red tactical switches, that way i know how it works, and i know what to do when i want to possibly put on an xcm shell. another problem might be the 3.5 mm jack, do i have to do that? or can i do the pnc port? And does anyone have instructions to this now?
geestthebeast said:I think im gunna go for it, i have a 13 watt soldering iron, so it should be safer and easier to use, that way i don't burn anything out, and i can buy some 30 gauge wire and i allready have rosin core solder. Plus radio shack will sell red tactical switches, that way i know how it works, and i know what to do when i want to possibly put on an xcm shell. another problem might be the 3.5 mm jack, do i have to do that? or can i do the pnc port? And does anyone have instructions to this now?
geestthebeast said:another problem might be the 3.5 mm jack, do i have to do that? or can i do the pnc port? And does anyone have instructions to this now?