Search results

Greetings. You CAN record macros on the Berserker. On the XBOX 360 macro you could only record one macro at a time (i.e. as soon as you recorded a new macro, your old macro got deleted. And even if you changed pages, you could still only hold one macro). On the Berserker you can set up...

You caught us in the middle of a website upgrade. Go to https://old.vikingdigital.com

Hi don65 We are continuing to sell the Berserker for the next gen consoles only. I.e. putting all our effort into the next gen consoles, and leaving everything else behind. The old website with all its downloads are still up at https://old.vikingdigital.com we also sell DIY stuff at...

Norm. In your specific case, we replaced your whole controller like 3-4 times, then refunded you altogether. Then later you went and bought another one from us and said that one didn't work. You are doing something wrong. I handled your case personally towards the end and I can tell you with...

Also by the way, welcome!

Soldering to a tac switch.

Greetings; On this particular modchip you won't have to install any wire to the "G" ground pad. It can be left un-connected. (The flex modchip connector that gets sandwiched between the sony circuit board takes care of the G connection for you). For the S2 wire connection on the JDM-001, the...

After some further thought from the installation perspective, we're going with all four on the bottom.

It's going to be pretty standard issue, a stock PS4 controller, 9mm 4-quadrant LED Lense installed near the mic jack at the bottom, 4 standard tac switches drilled and glued into the shell. We don't turn enough volume to develop a blade system like we did for XBOX One. Also, the day after we...

We will keep selling the DIY stuff. You might bookmark this to get to the old site for the time being https://old.vikingdigital.com

I can't quite understand everything, but you could try resetting everything: Global mod reset function: To reset all mods, modes, speeds, and delays to the factory default, follow these instructions: hold the mod switch and tap the Sync button and then release both buttons. All four LED’s will...

I think the new elite has a few widgets and pieces and crap inside that make it so the old original "Revision A" flex Berserker chip won't fit in the new Elite controller. The Ragnarok Rev D chip might barely fit but I think the old Rev A Berserker modchip is too big to fit in the elite.

This week we just retired Ragnarok as a retail product. We're still selling DIY chips to build your own Ragnarok, but as far as selling retail controllers and doing send-in service, we are only doing Berserkers from here on out.

We are retired from selling Ragnaroks as of this week. From now on we're just selling Berserkers. We'll still have the DIY chips to build your own Ragnarok though. I will add Gears of War to the list of requested features for future Ragnarok updates.

You're not the first one to miss it on the last page. I've actually missed it myself when looking for the instructions. It's like the page-down button gets jammed when viewing the .PDF or something. I don't know what the deal is but I have to say that it's out of place to have the remappable...

You might be able to get the Ragnarok modchip to work on the Elite but I haven't cracked one open yet to see. We aren't officially selling anything for Elite yet.

Freya to the rescue, nice tips! There are two different modchips: Pro Remap modchip Ragnarok modchip For the Ragnarok chip, the instruction you want are on page 20 "Re-mappable Buttons (white)". (It's the very last page of the operation instructions, I'm looking at the 9-26-2015 edition...

Yes I saw that, it's normal on these chips. There is some solder starvation on that pin so to speak, it is because there is no soldermask (dam) from that pad to the center ground pad, so the solder deposited on that pin is free to make it's way underneath the PIC chip to the main ground pad...

If the LED driver board or ribbon cable is failed the mod will look dead (no lights). Not sure exactly how to tell the difference between problem with modchip and wiring vs. problem with LED driver board and ribbon cable. Is the ribbon cable you have there a "straight/same side" cable...