Search results

All you need to do is 1.Connect Controller in bootloader 2.Select .hex file 3.program/verify 4.reset Worked for me

Thank you! I never even seen that post. Checking for shorts now

Hey, I recently received a few error codes on my DIY controller (Before it was working fine) When I flash the button test code, #3 blinks 4 times, then #4 blinks 4 times and it keeps on repeating, I don't even touch any buttons. Anyone have any suggestions? I check for any visible...

Use winrar. Its free

The link is here http://www.viking360.com/downloads/CG%20Install%20Instructions.rar This tutorial is MORE than enough. I followed this tutorial this with absolutely ZERO experience in anything electronic or soldering. Just follow the Instructions to the T, and use common sense. May seem...

Lol... Hope you don't mind.( I don't any take credit for the USB idea) Using a 3.5mm jack would be too much of a PITA to program, since you have to find a "rarer" cable, But with the mini b usb, everybody has that cable, so If I go over a friends house I can just use his cable. You and I...

Here are some Pics of the assembled pics 1. Since I didn't desolder the some of the points on the mic jack, the Mini Usb was having clearance issues with closing the controller. So I had to "Squeeze" everything together. 2. I didn't pull the electrical tape, since I am scared that it...

Hi guys here are some pics of my install, I have a few things/tips to say. 1.This is my first soldering project ever.(and VERY proud if it, if I say so myself) 2.Yes it is possible to use a Radioshack iron for this.( I used 25 watts) 3.I used .015 leaded solder 4.Flux is your BEST...

I appreciate the reply, This cleared up ALOT of questions I had. And Question 3 was if I had to "bridge the two green points together, Forgot to put the number :D I ordered the DIY Kit yesterday, thanks for helping.

Hello everybody, I have a few questions about the DIY Kit? 1. Does the kit come with the newer 3.5mm jacks, or the older USB flash key? 2. I don't understand one part in the Duo Install http://www.viking360.com/forums/viewtopic.php?f=22&t=13 In the diagram below, I understand that you have to...